Toward fully three-dimensional-printed miniaturized confocal imager
作者: Janset SavaşRamin KhayatzadehFehmi ÇivitçiYiğit Dağhan GökdelOnur Ferhanoğlu
作者单位: 1Istanbul Technical University
2Istanbul Bilgi University
3Oregon Health and Science University
刊名: Optical Engineering, 2018, Vol.57 (4), pp.041402-041402
来源数据库: SPIE-the International Society for Optical Engineering
DOI: 10.1117/1.OE.57.4.041402
关键词: Confocal endoscopyScannersOptical fabricationImaging systemsLenses
原始语种摘要: We present a disposable miniaturized confocal imager, consisting mostly of three-dimensional (3-D)-printed components. A 3-D printed laser scanner with 10 × 10 mm 2 frame size is employed for Lissajous scan, with 180 and 315 Hz frequencies in orthogonal directions corresponding to ± 8 deg and ± 4 deg optical scan angles, respectively. The actuation is done electromagnetically via a magnet attached to the scanner and an external coil. A miniaturized lens with 6-mm clear aperture and 10-mm focal length is 3-D printed and postprocessed to obtain desired ( ≤ λ / 5 surface roughness) performance. All components are press-fitted into a 3-D-printed housing having 17 mm width, which is comparable to many of the MEMS-based scanning imagers. Finally, line-scan from a resolution target and...
全文获取路径: SPIE  (合作)
分享到:

×
关键词翻译
关键词翻译
  • 制造 零部件
  • printed 印刷
  • dimensional 量纲的
  • confocal 共焦
  • three 
  • scanner 扫描设备
  • aperture 
  • components 零部件
  • fabrication 零部件
  • fully 充分
  • directions 指示