Study on the fatigue behaviour of selective laser melted AlSi10Mg alloy
2·3选择性激光熔复AlSi10Mg合金的疲劳行为研究
作者: Srinivasa Rakesh ChA. RajaR. JayaganthanN.J. VasaM. Raghunandan
作者单位: 1Department of Engineering Design, Indian Institute of Technology Madras, Chennai, 600036, India
2Intech DMLS Pvt. Ltd. Peenya, Bengaluru, 560058, India
刊名: Materials Science & Engineering A, 2020, Vol.781
来源数据库: Elsevier Journal
DOI: 10.1016/j.msea.2020.139180
关键词: AlSi10Mg alloySelective laser meltingCellular structureHigh cycle fatigueCrack path propagation
英文摘要: Abstract(#br)Selective laser melted (SLM) AlSi10Mg alloy was subjected to high cycle fatigue test to elucidate the effect of microstructural characteristics and sub-microscopic defects in its dynamic behaviour. The microstructure of the processed materials revealed scan tracks on the scanning surface and solidified melt pool/melt pool tracks on the surface in the build direction. The processed material exhibits equi-axed morphology with 〈100〉 fibre texture on the scanned surface and elongated grains preferably 〈100〉 orientation in the build direction. The pore size and distribution in the selective laser melted materials were measured using computed micro-tomography method μ-(CT). The cellular structures constituting 500 nm sized grains were observed. The boundary of the cell was a...
全文获取路径: Elsevier  (合作)
分享到:
来源刊物:
影响因子:2.108 (2012)

×
关键词翻译
关键词翻译
  • melted 熔融的
  • behaviour 性质
  • fatigue 疲劳
  • laser 激光
  • alloy 合金
  • selective 选择性的