Grain morphology evolution and texture characterization of wire and arc additive manufactured Ti-6Al-4V
作者: Jian WangXin LinJitong WangHaiou YangYinghui ZhouChong WangQiuge LiWeidong Huang
作者单位: 1State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi'an, Shaanxi, 710072, PR China
2Key Laboratory of Metal High Performance Additive Manufacturing and Innovative Design, MIIT PR China
刊名: Journal of Alloys and Compounds, 2018, Vol.768 , pp.97-113
来源数据库: Elsevier Journal
DOI: 10.1016/j.jallcom.2018.07.235
关键词: Wire and arc additive manufacturingTi-6Al-4V alloyGrain morphologyTexture characterization
英文摘要: Abstract(#br)In this study, four straight walls of Ti-6Al-4V titanium alloy were fabricated by wire and arc additive manufacturing (WAAM) to investigate the effect of deposition parameters on grain morphology evolution and texture characterization in the building direction. A certain volume fraction of equiaxed β grain appeared at the bottom of the wall and can be controlled by deposition parameters, while the columnar β grain zone was on the equiaxed β grain zone. It is indicated that the formation of equiaxed β grains at the bottom of the wall initiated from the recrystallization. There were the large residual stress, strain, and high heating rate when depositing the first several layers near the substrate, which can induce the recrystallization of the already-deposited layers. However,...
全文获取路径: Elsevier  (合作)
分享到:
来源刊物:
影响因子:2.39 (2012)

×
关键词翻译
关键词翻译
  • manufactured 出品
  • morphology 形态学
  • texture 结构
  • additive 添加剂
  • evolution 进化
  • Grain 谷物