Picosecond laser surface treatment and analysis of thermoplastic composites for structural adhesive bonding
作者: Rodolfo I. LedesmaFrank L. PalmieriYi LinMarcus A. BelcherDaniel R. FerriellSuzanne K. ThomasJohn W. Connell
作者单位: 1National Institute of Aerospace, Hampton, VA, 23666, USA
2NASA Langley Research Center, Hampton, VA, 23681, USA
3The Boeing Company, Seattle, WA, 98124, USA
4The Boeing Company, Saint Louis, MO, 63134, USA
刊名: Composites Part B, 2020, Vol.191
来源数据库: Elsevier Journal
DOI: 10.1016/j.compositesb.2020.107939
关键词: PEEKLIBSFailure modeAdhesive bonding
原始语种摘要: Abstract(#br)In this work, laser surface treatment and laser induced breakdown spectroscopy (LIBS) were combined to improve process control of surface treatment and pre-bond surface characterization to measure the reduction in silicone content. This approach addresses guidelines provided by the Federal Aviation Administration (FAA) in Advisory Circular 20–107B focused on improved process controls, as well as the goals of the NASA Advanced Composites Project focused on reducing the timeline to certification. A picosecond laser was used to surface treat poly (ether ether ketone) (PEEK)/carbon fiber composites using two different wavelengths (355 and 1064 nm). The same laser was used to characterize the PEEK surfaces for silicone contamination before and after laser treatment via LIBS....
全文获取路径: Elsevier  (合作)
分享到:
来源刊物:
影响因子:2.143 (2012)

×
关键词翻译
关键词翻译
  • thermoplastic 热塑性塑料
  • composites 菊科植物
  • structural 构造
  • laser 激光
  • adhesive 粘合剂
  • treatment 处理
  • analysis 分析
  • bonding 焊接
  • surface