Experimental study of heat dissipation at the crack tip during fatigue crack propagation
作者: A. VshivkovA. IziumovaO. PlekhovJ. Bar
作者单位: 1Institute of Continuous Media Mechanics UB RAS, 614014 Perm, Russia
2institute of Continuous Media Mechanics of the Ural Branch of the Russian Academy of Sciences, 614013, Ac. Koroleva Street, 1, Perm, Russia
3University of the Federal Armed Forces, Institute for Materials Science, 85577 Neubiberg, Germany
刊名: Fracture and Structural Integrity, 2016, Vol.10 (35), pp.57 - 63
来源数据库: Gruppo Italiano Frattura
DOI: 10.3221/IGF-ESIS.35.07
关键词: Heat flowFatigue crackDissipated energy
原始语种摘要: This work is devoted to the development of an experimental method for studying the energy balance during cyclic deformation and fracture. The studies were conducted on 304 stainless steel AISE and titanium alloy OT4-0 samples. The investigation of the fatigue crack propagation was carried out on flat samples with different geometries and types of stress concentrators. The heat flux sensor was developed based on the Seebeck effect. This sensor was used for measuring the heat dissipation power in the examined samples during the fatigue tests. The measurements showed that the rate of fatigue crack growth depends on the heat flux at the crack tip.
全文获取路径: Gruppo Italiano Frattura 
分享到:

×
关键词翻译
关键词翻译
  • fatigue 疲劳
  • crack 裂隙
  • propagation 传播
  • dissipation 耗散
  • stainless 不锈的
  • study 学习
  • balance 平衡
  • sensor 感受器
  • steel 
  • during 在的期间