Microstructural, mechanical and corrosion behaviour of Al–Si alloy reinforced with SiC metal matrix composite
作者: Kapil BandilHimanshu VashisthSourav KumarLokesh VermaAnbesh JamwalDevendra KumarNeera SinghKishor Kumar SadasivuniPallav Gupta
作者单位: 1Department of Mechanical Engineering, Amity University Uttar Pradesh, Noida, India
2Department of Mechanical Engineering, Alakh Prakash Goyal Shimla University, India
3Department of Ceramic Engineering, Indian Institute of Technology (Banaras Hindu University), Varanasi, India
4Department of Mechanical and Industrial Engineering, Tallinn University of Technology, Estonia
5Center for Advanced Materials, Qatar University, Qatar
刊名: Journal of Composite Materials, 2019, Vol.53 (28-30), pp.4215-4223
来源数据库: Sage Publications, Inc.
DOI: 10.1177/0021998319856679
关键词: Stir castingMicrostructureDensityHardnessWearCorrosion
原始语种摘要: The aim of the present study is to investigate the effect of Si and SiC addition on the microstructure, mechanical, and corrosion properties of Al matrix-based composites. Al–Si (2 wt% fixed) alloy reinforced SiC composites were prepared by stir-casting process using SiC reinforcement contents from 0 to 20 wt% at an interval of 5%. A uniform dispersion of SiC particles in the Al matrix was observed from the scanning electron microscopic analysis. Maximum hardness is found for composites having 15 wt% reinforcement content. Pin-on-disc wear test reveals that SiC particles increase the wear resistance of composites. Corrosion test reveals that composites reinforced with 20% reinforcement content shows the minimum i corr among all the compositions, attributing to the maximum...
全文获取路径: Sage国际出版集团  (合作)
分享到:

×
关键词翻译
关键词翻译
  • reinforced 加筋的
  • composites 菊科植物
  • mechanical 机械的
  • corrosion 腐蚀
  • behaviour 性质
  • matrix 石基
  • reinforcement 放大
  • content 品位
  • hardness 硬度
  • casting 铸模