Effects of fibre content and orientation on wear properties of basalt fibre/acrylonitrile–butadiene rubber composites
纤维含量和取向对玄武岩纤维/丙烯腈-丁二烯橡胶复合材料磨损性能的影响
作者: Zhuo LiYingzhe LiJunmei ChengXingye LuYihan Yang
作者单位: 1grid.412610.0, 0000 0001 2229 7077, Key Laboratory of Rubber-Plastics, Ministry of Education/Shandong Provincial Key Laboratory of Rubber-Plastics, Qingdao University of Science & Technology, 266042, Qingdao, China
刊名: Iranian Polymer Journal, 2020, Vol.29 (4), pp.361-367
来源数据库: Springer Nature Journal
DOI: 10.1007/s13726-020-00802-y
关键词: Basalt fibreRubber-based compositesCoefficient of frictionWear resistanceMechanical properties
英文摘要: Abstract(#br)Basalt fibre (BF)/acrylonitrile–butadiene rubber (NBR) composites with various BF contents and orientations were prepared, and the curing, physical and mechanical properties and wear performance under block-on-ring abrasion conditions were evaluated. The results showed that the curing time was not obviously affected by the BFs. The addition of BFs increased the hardness but had negative influence on the tensile/tear strength of the NBR composites, especially when the BFs were oriented perpendicular to the tensile/tear direction with a high content, which should be due to the weak connection between the BFs and the rubber matrix. The coefficient of friction (COF) of the composites decreased significantly when BFs were added, whereas the content (3–30 phr) and the orientation...
全文获取路径: Springer Nature  (合作)
分享到:
来源刊物:
影响因子:1.053 (2012)

×