High pressure characterization and modelling of CaCO<sub>3</sub> powder mix in the Bridgman anvil apparatus
作者: Sven BergPär JonsénHans-Åke HäggbladJohan E. Carlson
作者单位: 1Department of Engineering, Science and Mathematics , Luleå University of Technology , Luleå , Sweden
2Department of Computer Science, Electrical and Space Engineering , Luleå University of Technology , Luleå , Sweden
刊名: High Pressure Research, 2012, Vol.32 (4), pp.490-508
来源数据库: Taylor & Francis Journal
DOI: 10.1080/08957959.2012.736505
关键词: calcitecap modelfinite elementmaterial model
原始语种摘要: For investigating high pressure sintering processes, numerical models can be used. This will demand material models which give realistic mechanical response throughout the whole parameter space of the actual process. As the pressures become higher, the material density approaches its full theoretical value and the elastic part of the material properties becomes increasingly important. In this investigation, Poisson's ratio was determined using ultrasonic pulse-echo measurements. A new elastic model and an improved plasticity model were implemented into a user-defined material subroutine in a finite element (FE) code. To experimentally investigate the load displacement response and pressure distribution in powder compacts during pressing, a pressure instrumented Bridgman anvil apparatus...
全文获取路径: Taylor & Francis  (合作)
分享到:
来源刊物:
影响因子:0.901 (2012)

×
关键词翻译
关键词翻译
  • apparatus 仪器频
  • sub 分段
  • anvil 测砧
  • pressure 压力
  • powder 粉末
  • modelling 模型制造